Dry powder mixer Description
Our dry powder mxier machine is latestly designed based on the U-type horizontal ribbon mixer through several times improvement.
It adopted three-layer blades, i.e. the inner screw blade, the outer screw blade and the middle screw blade.
The outer and inner screw blades driven by high speed rotating shaft,mixing the material in maximum,the inner screw blade forced the material to sides , the outer screw blade forced sides material to inward, mixes the materials back and forth.
At the same time,some material driven by the middle screw blade do the radial motion,to form the convective mixing, to achievea high uniformity mixing effect in relatively short time.
Our dry powder mixing machines are easy use and maintains and clean, small occupies, high efficient and long service life;
horizontal mixer machine is specialized in blending the resin emulsion with different gradations of sand particles.
Horizontal powder mixer use all-stainless steel or carbonate steel, U-type swivel design, a single batch was stirred amount 1-50T.
stainless steel mixers, with automatic limit switches, multiple protection, greatly improving the equipment, safety during operation. Mixer adopt outer and inner layers ribbon blender, coiled form with the rotational direction of the material from both ends toward the middle push, and the inner spiral push with the material from the middle to the ends that to form to convective mixing.
2. Technical Parameters of dry powder mixer
| Type(FMZZ-) | Power(kw) | Cylinder size(mm) | Dimension (mm) LWH |
| 1T | 5.5 | Φ850×1250 | 2140x900x1325 |
| 2T | 7.5 | Φ1050×1875 | 2940x1300x1800 |
| 3T | 11 | Φ1050×3530 | 3315x1300x1800 |
| 5T | 15 | Φ1400×2500 | 3850x1700x2240 |
| 10T | 22 | Φ1600×3000 | 4400x1700x2560 |
| 15T | 30 | Φ1600×4200 | 5250x1850x2600 |
| 20T | 37 | Φ1850×4300 | 6250x1900x2545 |
| 30T | 45 | Φ2300×4500 | 6300x2300x3150 |
| 50T | 50 | Φ3500*5000 | 7500x2700x3200 |
The capacity can be adjusted according to user requirement.
1) It adopts U-type barrel structure, stable performance, low noise, long service time, conveniently installation, extensive application range.
2) Latest three- layer spiral blades mixing design, no stiring blind angle, quickly mixing, high uniformity.
3) Equipped with electrical screw conveyor, to reach convenient and quickly feeding.
4) The trapdoor is on the bottom of ribbon mixer, conveniently cleaning.
5) Small Investment, small footprint, simple operation.
6) Customized : this mixer can be made of carbon steel, stainless steel and so on , according to customers' requirement.
